SPEC 26112

HVTECK CU 1/C 115TRXLPE TS PVC AIA PVC 5kV 133% CSA

Single Conductor, 115 Mils Tree Retardant Cross Linked Polyethylene, 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  2. Conductor Shield:Semi-conducting cross-linked copolymer
  3. Insulation:115 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Inner Jacket:PVC inner jacket
  7. Armour:Aluminum Interlocked Armour (AIA)
  8. Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 5kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL) and 105°C for use in harsh Canadian environments. For installation in cable trays, duct banks, direct burial, troughs, continuous rigid cable supports and concrete encaseable.

Specifications:

  • ASTM B3 Standard Specification for Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CU 115 TRXLPE AIA 5kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldDia. Over Inner JacketDia. Over ArmourJacket Thickness1Approx. ODApprox. Weight
    AWG/KcmilNo.inchinchmilinchinchinchmilinchlb/1000ft
    TBA270.2830.5501150.6100.7600.970501.070652
    TBA1190.3220.5891150.6490.7991.009501.109729
    TBA1/0190.3620.6291150.6890.8391.159501.259895
    TBA2/0190.4050.6721150.7320.9121.232501.3321044
    TBA3/0190.4560.7231150.7830.9631.283501.3831189
    TBA4/0190.5120.7791150.8391.0191.339501.4391366
    TBA250370.5580.8341150.8941.0741.394501.4941525
    TBA350370.6610.9371150.9971.1771.497501.5971911
    TBA500370.7891.0651151.1251.3051.625501.7252469
    TBA750610.9681.2531151.3131.4931.813601.9333417
    TBA1000611.1171.4021151.4621.6421.972602.0924364
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence Impedance*Positive Sequence Impedance*Phase Short Circuit Current @ 60HzAllowable Ampacity in Vented Cable Tray 90°C‡Allowable Ampacity Directly Buried 90°C‡
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftkAmpAmpAmp
    27.55310.1620.2030.0450.0520.559+j0.5070.204+j0.0524.8215221
    17.86700.1290.1610.0410.0500.521+j0.4860.162+j0.0506.0245247
    1/08.88450.1020.1280.0380.0500.488+j0.4640.129+j0.0507.6278275
    2/09.310650.0810.1010.0340.0490.462+j0.4430.102+j0.0499.6317306
    3/09.713420.06420.0800.0310.0470.442+j0.4200.081+j0.04712.1357335
    4/010.116930.0510.0640.0290.0450.426+j0.3960.065+j0.04515.2404369
    25010.520000.04310.0540.0270.0440.415+j0.3740.055+j0.04418.0456412
    35011.228000.03080.0390.0240.0420.395+j0.3360.040+j0.04225.2537456
    50012.140000.02160.0280.0200.0400.375+j0.2960.029+j0.04036.0616497
    75013.560000.01440.0190.0180.0380.350+j0.2480.020+j0.03853.9706551
    100014.680000.01080.0150.0150.0360.332+j0.2170.016+j0.03671.9813596
    * Calculations are based on three cables triplexed / 5 mil 25 % over lapping copper tape shield / Conductor temperature of 90°C / Shield temperature of 45°C / Earth resistivity of 100 ohms-meter
    † Ampacities are based on Table D17M of the 2015 Canadian Electrical Code Part I (40°C Ambient Air Temperature, indoor installation)
    ‡ Ampacities are based on Table D17A of the 2015 Canadian Electrical Code Part I
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldDia. Over Inner JacketDia. Over ArmourJacket Thickness1Approx. ODApprox. Weight
    AWG/KcmilNo.mmmmmmmmmmmmmmmmkg/km
    TBA277.1913.972.9215.4919.3024.641.2727.18970
    TBA1198.1814.962.9216.4820.2925.631.2728.171085
    TBA1/0199.1915.982.9217.5021.3129.441.2731.981332
    TBA2/01910.2917.072.9218.5923.1631.291.2733.831554
    TBA3/01911.5818.362.9219.8924.4632.591.2735.131769
    TBA4/01913.0019.792.9221.3125.8834.011.2736.552033
    TBA2503714.1721.182.9222.7127.2835.411.2737.952269
    TBA3503716.7923.802.9225.3229.9038.021.2740.562844
    TBA5003720.0427.052.9228.5833.1541.281.2743.823674
    TBA7506124.5931.832.9233.3537.9246.051.5249.105085
    TBA10006128.3735.612.9237.1341.7150.091.5253.146494
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence Impedance*Positive Sequence Impedance*Phase Short Circuit Current @ 60HzAllowable Ampacity in Vented Cable Tray 90°C‡Allowable Ampacity Directly Buried 90°C‡
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftkAmpAmpAmp
    2190.5023630.53150.670.01370.17060.559+j0.5070.204+j0.0524.8215221
    1198.1229820.42320.530.01250.16400.521+j0.4860.162+j0.0506.0245247
    1/0223.5237600.33460.420.01160.16400.488+j0.4640.129+j0.0507.6278275
    2/0236.2247390.26570.330.01040.16080.462+j0.4430.102+j0.0499.6317306
    3/0246.3859720.21060.260.00940.15420.442+j0.4200.081+j0.04712.1357335
    4/0256.5475340.16730.210.00880.14760.426+j0.3960.065+j0.04515.2404369
    250266.7089000.14140.180.00820.14440.415+j0.3740.055+j0.04418.0456412
    350284.48124600.10100.130.00730.13780.395+j0.3360.040+j0.04225.2537456
    500307.34178000.07090.090.00610.13120.375+j0.2960.029+j0.04036.0616497
    750342.90267000.04720.060.00550.12470.350+j0.2480.020+j0.03853.9706551
    1000370.84356000.03540.050.00460.11810.332+j0.2170.016+j0.03671.9813596
    * Calculations are based on three cables triplexed / 5 mil 25 % over lapping copper tape shield / Conductor temperature of 90°C / Shield temperature of 45°C / Earth resistivity of 100 ohms-meter
    † Ampacities are based on Table D17M of the 2015 Canadian Electrical Code Part I (40°C Ambient Air Temperature, indoor installation)
    ‡ Ampacities are based on Table D17A of the 2015 Canadian Electrical Code Part I

    Revision: 3.0.00C