Name: HVTECK AL 1/C 175NLEPR TS PVC AIA PVC 15kV 100% CSA
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > HVTECK > SPEC26321

SPEC 26321

HVTECK AL 1/C 175NLEPR TS PVC AIA PVC 15kV 100% CSA

Single Conductor, 175 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 100% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

Download PDF

Construction:

Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation:175 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Inner Jacket:PVC inner jacket
Armour:Aluminum Interlocked Armour (AIA)
Overall Jacket:Red Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL) and 105°C for use in harsh Canadian environments. For installation in cable trays, duct banks, direct burial, troughs, continuous rigid cable supports and concrete encaseable.

Specifications:

ASTM B800 8000 Series Aluminum Alloy Wire

ASTM B836 Compact Rounded Stranded Aluminum Conductors

CSA C22.2 No. 174 Cables in Hazardous Locations

CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV

CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating

CSA HL - for Hazardous Locations rating

CSA SUN RES - for Sunlight Resistant rating

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

ICEA T-29-520 Flame Test (210,000 BTU/Hr)

IEEE 383 Flame Test (70,000 btu)

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)

FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Sample Print Legend:

(CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CPT AL 175 NLEPR AIA 15kV 100% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Dia. Over Inner Jacket	Dia. Over Armour	Jacket Thickness¹	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	inch	inch	mil	inch	inch	inch	mil	inch	lb/1000ft
TBA	2	7	0.268	0.655	175	0.715	0.865	1.185	50	1.285	696
TBA	1	19	0.299	0.686	175	0.746	0.926	1.246	50	1.346	772
TBA	1/0	19	0.336	0.723	175	0.783	0.963	1.283	50	1.383	824
TBA	2/0	19	0.376	0.763	175	0.823	1.003	1.323	50	1.423	884
TBA	3/0	19	0.423	0.810	175	0.870	1.050	1.370	50	1.470	957
TBA	4/0	19	0.475	0.862	175	0.922	1.102	1.422	50	1.522	1042
TBA	250	37	0.520	0.916	175	0.976	1.156	1.476	50	1.576	1128
TBA	350	37	0.616	1.012	175	1.072	1.252	1.572	50	1.672	1304
TBA	500	37	0.736	1.132	175	1.192	1.372	1.692	60	1.812	1583
TBA	750	61	0.908	1.335	175	1.395	1.575	1.895	60	2.015	2011
TBA	1000	61	1.060	1.487	175	1.547	1.727	2.057	60	2.177	2447

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination

Table 2 – Electrical and Engineering Data

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity in Vented Cable Tray 90°C‡	Allowable Ampacity Directly Buried 90°C‡
AWG/Kcmil	inch	lb	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	9.0	398	0.266	0.334	0.048	0.058	0.695+j0.460	0.335+j0.058	2.9	169	176
1	9.4	502	0.211	0.265	0.045	0.056	0.627+j0.444	0.266+j0.056	3.7	194	198
1/0	9.7	634	0.168	0.211	0.041	0.054	0.573+j0.427	0.212+j0.054	4.7	222	223
2/0	10.0	799	0.133	0.167	0.038	0.052	0.529+j0.409	0.168+j0.052	5.9	255	250
3/0	10.3	1007	0.105	0.132	0.035	0.050	0.494+j0.389	0.133+j0.050	7.4	290	278
4/0	10.7	1270	0.0836	0.105	0.032	0.048	0.465+j0.368	0.106+j0.048	9.4	329	309
250	11.0	1500	0.0707	0.089	0.031	0.047	0.446+j0.348	0.090+j0.047	11.1	370	347
350	11.7	2100	0.0505	0.064	0.027	0.045	0.415+j0.316	0.065+j0.045	15.5	446	402
500	12.7	3000	0.0354	0.045	0.023	0.042	0.387+j0.281	0.046+j0.042	22.1	533	451
750	14.1	4500	0.0236	0.030	0.021	0.040	0.354+j0.234	0.031+j0.040	33.2	631	500
1000	15.2	6000	0.0177	0.023	0.018	0.038	0.332+j0.205	0.024+j0.038	44.3	707	539

* Calculations are based on three cables triplexed / 5 mil 25 % over lapping copper tape shield / Conductor temperature of 90°C / Shield temperature of 45°C / Earth resistivity of 100 ohms-meter
† Ampacities are based on Table D17M of the 2015 Canadian Electrical Code Part I (40°C Ambient Air Temperature, indoor installation)
‡ Ampacities are based on Table D17A of the 2015 Canadian Electrical Code Part I

Table 3 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Dia. Over Inner Jacket	Dia. Over Armour	Jacket Thickness¹	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	mm	mm	mm	mm	mm	mm	mm	mm	kg/km
TBA	2	7	6.81	16.64	4.44	18.16	21.97	30.10	1.27	32.64	1036
TBA	1	19	7.59	17.42	4.44	18.95	23.52	31.65	1.27	34.19	1149
TBA	1/0	19	8.53	18.36	4.44	19.89	24.46	32.59	1.27	35.13	1226
TBA	2/0	19	9.55	19.38	4.44	20.90	25.48	33.60	1.27	36.14	1316
TBA	3/0	19	10.74	20.57	4.44	22.10	26.67	34.80	1.27	37.34	1424
TBA	4/0	19	12.07	21.89	4.44	23.42	27.99	36.12	1.27	38.66	1551
TBA	250	37	13.21	23.27	4.44	24.79	29.36	37.49	1.27	40.03	1679
TBA	350	37	15.65	25.70	4.44	27.23	31.80	39.93	1.27	42.47	1941
TBA	500	37	18.69	28.75	4.44	30.28	34.85	42.98	1.52	46.02	2356
TBA	750	61	23.06	33.91	4.44	35.43	40.00	48.13	1.52	51.18	2993
TBA	1000	61	26.92	37.77	4.44	39.29	43.87	52.25	1.52	55.30	3642

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination

Table 4 – Electrical and Engineering Data (Metric)

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity in Vented Cable Tray 90°C‡	Allowable Ampacity Directly Buried 90°C‡
AWG/Kcmil	mm	newton	Ω/km	Ω/km	MΩ*km	Ω/km	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	228.60	1771	0.8727	1.10	0.0146	0.1903	0.695+j0.460	0.335+j0.058	2.9	169	176
1	238.76	2234	0.6923	0.87	0.0137	0.1837	0.627+j0.444	0.266+j0.056	3.7	194	198
1/0	246.38	2821	0.5512	0.69	0.0125	0.1772	0.573+j0.427	0.212+j0.054	4.7	222	223
2/0	254.00	3556	0.4364	0.55	0.0116	0.1706	0.529+j0.409	0.168+j0.052	5.9	255	250
3/0	261.62	4481	0.3445	0.43	0.0107	0.1640	0.494+j0.389	0.133+j0.050	7.4	290	278
4/0	271.78	5652	0.2743	0.34	0.0098	0.1575	0.465+j0.368	0.106+j0.048	9.4	329	309
250	279.40	6675	0.2320	0.29	0.0094	0.1542	0.446+j0.348	0.090+j0.047	11.1	370	347
350	297.18	9345	0.1657	0.21	0.0082	0.1476	0.415+j0.316	0.065+j0.045	15.5	446	402
500	322.58	13350	0.1161	0.15	0.0070	0.1378	0.387+j0.281	0.046+j0.042	22.1	533	451
750	358.14	20025	0.0774	0.10	0.0064	0.1312	0.354+j0.234	0.031+j0.040	33.2	631	500
1000	386.08	26700	0.0581	0.08	0.0055	0.1247	0.332+j0.205	0.024+j0.038	44.3	707	539

Revision: 3.0.00C