SPEC 26212

HVTECK CU 1/C 140TRXLPE TS PVC AIA PVC 8kV 133% CSA

Single Conductor, 140 Mils Tree Retardant Cross Linked Polyethylene, 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  2. Conductor Shield:Semi-conducting cross-linked copolymer
  3. Insulation:140 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Inner Jacket:PVC inner jacket
  7. Armour:Aluminum Interlocked Armour (AIA)
  8. Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 8kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CU 140 TRXLPE AIA 8kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.inchinchmilinchmilinchmilinchlb/1000ftlb/1000ft
    TBA270.2820.6001400.660651.032501.132217699
    TBA1190.3220.6401400.700801.102501.202272816
    TBA1/0190.3610.6791400.739801.141501.241340912
    TBA2/0190.4050.7231400.783801.185501.2854261029
    TBA3/0190.4560.7741400.834801.346501.4465351186
    TBA4/0190.5120.8301400.890801.402501.5026711364
    664706^4/0190.5120.8301400.890801.414501.5147271470
    TBA250370.5580.8841400.944801.456501.5567901524
    TBA350370.6610.9871401.047801.559601.67911021945
    664685^500370.7891.1151401.175801.699601.81916382626
    TBA750610.9681.3041401.364801.900602.02023433566
    TBA1000611.1171.4531401.5131102.109602.22931184587
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    ^ Black overall jacket
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    213.65300.1620.2040.0460.0540.564 + j0.4860.205 + j0.0552075215221
    114.46690.1280.1620.0420.0520.524 + j0.4640.163 + j0.0522199245247
    1/014.98440.1020.1280.0390.0500.491 + j0.4450.129 + j0.0502320278275
    2/015.410640.0810.1020.0360.0480.466 + j0.4240.103 + j0.0482456317306
    3/017.413420.0640.0810.0330.0480.443 + j0.4010.082 + j0.0482614357335
    4/018.016920.0510.0650.0300.0460.426 + j0.3790.066 + j0.0472788404369
    4/018.216920.0510.0650.0300.0470.426 + j0.3780.066 + j0.0472788404369
    25018.720000.0430.0560.0280.0450.415 + j0.3580.057 + j0.0452955456412
    35020.128000.0310.0410.0240.0430.394 + j0.3230.042 + j0.0433274537456
    50021.840000.0220.0300.0210.0410.373 + j0.2850.031 + j0.0413671616497
    75024.260000.0140.0230.0180.0390.349 + j0.2390.024 + j0.0394257706551
    100026.780000.0110.0190.0160.0380.331 + j0.2100.020 + j0.0374718813596
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.mmmmmmmmmmmmmmmmkg/kmkg/km
    TBA277.1615.243.5616.761.6526.211.2728.753231040
    TBA1198.1816.263.5617.782.0327.991.2730.534051214
    TBA1/0199.1717.253.5618.772.0328.981.2731.525061357
    TBA2/01910.2918.363.5619.892.0330.101.2732.646341531
    TBA3/01911.5819.663.5621.182.0334.191.2736.737961765
    TBA4/01913.0021.083.5622.612.0335.611.2738.159992030
    664706^4/01913.0021.083.5622.612.0335.921.2738.4610822188
    TBA2503714.1722.453.5623.982.0336.981.2739.5211762268
    TBA3503716.7925.073.5626.592.0339.601.5242.6516402894
    664685^5003720.0428.323.5629.852.0343.151.5246.2024383908
    TBA7506124.5933.123.5634.652.0348.261.5251.3134875307
    TBA10006128.3736.913.5638.432.7953.571.5256.6246406826
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    ^ Black overall jacket
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    2345.4423590.53150.670.01400.17720.564 + j0.4860.205 + j0.0552075215221
    1365.7629770.41990.530.01280.17060.524 + j0.4640.163 + j0.0522199245247
    1/0378.4637560.33460.420.01190.16400.491 + j0.4450.129 + j0.0502320278275
    2/0391.1647350.26570.330.01100.15750.466 + j0.4240.103 + j0.0482456317306
    3/0441.9659720.21000.270.01010.15750.443 + j0.4010.082 + j0.0482614357335
    4/0457.2075290.16730.210.00910.15090.426 + j0.3790.066 + j0.0472788404369
    4/0462.2875290.16730.210.00910.15420.426 + j0.3780.066 + j0.0472788404369
    250474.9889000.14110.180.00850.14760.415 + j0.3580.057 + j0.0452955456412
    350510.54124600.10170.130.00730.14110.394 + j0.3230.042 + j0.0433274537456
    500553.72178000.07220.100.00640.13450.373 + j0.2850.031 + j0.0413671616497
    750614.68267000.04590.080.00550.12800.349 + j0.2390.024 + j0.0394257706551
    1000678.18356000.03610.060.00490.12470.331 + j0.2100.020 + j0.0374718813596
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.

    Revision: 1.000.000

    Updated On: Dec. 11, 2023, 9:29 p.m. UTC