Name: HVTECK AL 1/C 115NLEPR TS PVC AIA PVC 5kV 133% CSA
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > HVTECK > SPEC26122

SPEC 26122

HVTECK AL 1/C 115NLEPR TS PVC AIA PVC 5kV 133% CSA

Single Conductor, 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

Download PDF

Construction:

Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation:115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Inner Jacket:PVC inner jacket
Armour:Aluminum Interlocked Armour (AIA)
Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 5kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL) and 105°C for use in harsh Canadian environments. For installation in cable trays, duct banks, direct burial, troughs, continuous rigid cable supports and concrete encaseable.

Specifications:

ASTM B800 8000 Series Aluminum Alloy Wire

ASTM B836 Compact Rounded Stranded Aluminum Conductors

CSA C22.2 No. 174 Cables in Hazardous Locations

CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV

CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating

CSA HL - for Hazardous Locations rating

CSA SUN RES - for Sunlight Resistant rating

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

ICEA T-29-520 Flame Test (210,000 BTU/Hr)

IEEE 383 Flame Test (70,000 btu)

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)

FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Sample Print Legend:

(CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CPT AL 115 NLEPR AIA 5kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Dia. Over Inner Jacket	Dia. Over Armour	Jacket Thickness¹	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	inch	inch	mil	inch	inch	inch	mil	inch	lb/1000ft
TBA	2	7	0.268	0.535	115	0.595	0.745	0.955	50	1.055	511
TBA	1	19	0.299	0.566	115	0.626	0.776	0.986	50	1.086	548
TBA	1/0	19	0.336	0.603	115	0.663	0.813	1.023	50	1.123	594
TBA	2/0	19	0.376	0.643	115	0.703	0.853	1.173	50	1.273	719
TBA	3/0	19	0.423	0.690	115	0.750	0.930	1.250	50	1.350	820
TBA	4/0	19	0.475	0.742	115	0.802	0.982	1.302	50	1.402	901
TBA	250	37	0.520	0.796	115	0.856	1.036	1.356	50	1.456	982
TBA	350	37	0.616	0.892	115	0.952	1.132	1.452	50	1.552	1149
TBA	500	37	0.736	1.012	115	1.072	1.252	1.572	50	1.672	1383
TBA	750	61	0.908	1.215	115	1.275	1.455	1.775	60	1.895	1824
TBA	1000	61	1.060	1.367	115	1.427	1.607	1.937	60	2.057	2242

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination

Table 2 – Electrical and Engineering Data

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity in Vented Cable Tray 90°C‡	Allowable Ampacity Directly Buried 90°C‡
AWG/Kcmil	inch	lb	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	7.4	398	0.266	0.334	0.037	0.053	0.688+j0.516	0.335+j0.053	2.9	169	176
1	7.6	502	0.211	0.265	0.034	0.051	0.623+j0.499	0.266+j0.051	3.7	194	198
1/0	7.9	634	0.168	0.211	0.032	0.049	0.572+j0.479	0.212+j0.049	4.7	222	223
2/0	8.9	799	0.133	0.167	0.029	0.050	0.528+j0.457	0.168+j0.050	5.9	255	250
3/0	9.5	1007	0.105	0.132	0.026	0.048	0.494+j0.435	0.133+j0.048	7.4	290	278
4/0	9.8	1270	0.0836	0.105	0.024	0.047	0.467+j0.411	0.106+j0.047	9.4	329	309
250	10.2	1500	0.0707	0.089	0.023	0.045	0.451+j0.389	0.090+j0.045	11.1	370	347
350	10.9	2100	0.0505	0.064	0.020	0.043	0.423+j0.352	0.065+j0.043	15.5	446	402
500	11.7	3000	0.0354	0.045	0.017	0.041	0.396+j0.312	0.046+j0.040	22.1	533	451
750	13.3	4500	0.0236	0.030	0.016	0.039	0.365+j0.257	0.031+j0.039	33.2	631	500
1000	14.4	6000	0.0177	0.023	0.014	0.037	0.343+j0.224	0.024+j0.037	44.3	707	539

* Calculations are based on three cables triplexed / 5 mil 25 % over lapping copper tape shield / Conductor temperature of 90°C / Shield temperature of 45°C / Earth resistivity of 100 ohms-meter
† Ampacities are based on Table D17M of the 2015 Canadian Electrical Code Part I (40°C Ambient Air Temperature, indoor installation)
‡ Ampacities are based on Table D17A of the 2015 Canadian Electrical Code Part I

Table 3 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Dia. Over Inner Jacket	Dia. Over Armour	Jacket Thickness¹	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	mm	mm	mm	mm	mm	mm	mm	mm	kg/km
TBA	2	7	6.81	13.59	2.92	15.11	18.92	24.26	1.27	26.80	760
TBA	1	19	7.59	14.38	2.92	15.90	19.71	25.04	1.27	27.58	816
TBA	1/0	19	8.53	15.32	2.92	16.84	20.65	25.98	1.27	28.52	884
TBA	2/0	19	9.55	16.33	2.92	17.86	21.67	29.79	1.27	32.33	1070
TBA	3/0	19	10.74	17.53	2.92	19.05	23.62	31.75	1.27	34.29	1220
TBA	4/0	19	12.07	18.85	2.92	20.37	24.94	33.07	1.27	35.61	1341
TBA	250	37	13.21	20.22	2.92	21.74	26.31	34.44	1.27	36.98	1461
TBA	350	37	15.65	22.66	2.92	24.18	28.75	36.88	1.27	39.42	1710
TBA	500	37	18.69	25.70	2.92	27.23	31.80	39.93	1.27	42.47	2058
TBA	750	61	23.06	30.86	2.92	32.39	36.96	45.08	1.52	48.13	2714
TBA	1000	61	26.92	34.72	2.92	36.25	40.82	49.20	1.52	52.25	3336

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination

Table 4 – Electrical and Engineering Data (Metric)

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity in Vented Cable Tray 90°C‡	Allowable Ampacity Directly Buried 90°C‡
AWG/Kcmil	mm	newton	Ω/km	Ω/km	MΩ*km	Ω/km	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	187.96	1771	0.8727	1.10	0.0113	0.1739	0.688+j0.516	0.335+j0.053	2.9	169	176
1	193.04	2234	0.6923	0.87	0.0104	0.1673	0.623+j0.499	0.266+j0.051	3.7	194	198
1/0	200.66	2821	0.5512	0.69	0.0098	0.1608	0.572+j0.479	0.212+j0.049	4.7	222	223
2/0	226.06	3556	0.4364	0.55	0.0088	0.1640	0.528+j0.457	0.168+j0.050	5.9	255	250
3/0	241.30	4481	0.3445	0.43	0.0079	0.1575	0.494+j0.435	0.133+j0.048	7.4	290	278
4/0	248.92	5652	0.2743	0.34	0.0073	0.1542	0.467+j0.411	0.106+j0.047	9.4	329	309
250	259.08	6675	0.2320	0.29	0.0070	0.1476	0.451+j0.389	0.090+j0.045	11.1	370	347
350	276.86	9345	0.1657	0.21	0.0061	0.1411	0.423+j0.352	0.065+j0.043	15.5	446	402
500	297.18	13350	0.1161	0.15	0.0052	0.1345	0.396+j0.312	0.046+j0.040	22.1	533	451
750	337.82	20025	0.0774	0.10	0.0049	0.1280	0.365+j0.257	0.031+j0.039	33.2	631	500
1000	365.76	26700	0.0581	0.08	0.0043	0.1214	0.343+j0.224	0.024+j0.037	44.3	707	539

Revision: 3.0.00C